COUPLING TYPE |
TORQUE RANGE (Nm) |
ROLLER
CHAIN COUPLINGS (LRC): Easy to install, a high load capacity, inexpensive,
requiring minimum maintenance and some flexibility allowing some shaft misalignment.
Can be supplied as plain bore, plain bore machines with a keyway or to
accept a taper lock bush. |
Between 162 and 14432Nm at 50 rpm
(dependant upon coupling size selected). Shaft sizes range from 10mm to
150mm again dependant upon coupling size. |
DELRIN
CHAIN COUPLINGS (LNC): Corrosion resistant, pollution free and
therefore suitable for the food industry, low installation and maintenance
costs, require no lubrication, very quite when running and very safe as
outer delrin chain has a smooth surface. Available as pilot bore or
machined with a keyway to your shaft size. |
Between 23.9 and 498Nm below 100 rpm
(dependant upon coupling size selected). Shaft sizes range from 10mm to
60mm again dependant upon coupling size. |
'L'
SERIES JAW COUPLINGS: Simple to install, easy to maintain with excellent
performance characteristics dependant upon type of insert selected.
Contact us for more details on insert selection. Available in pilot bore
or machined with keyway to your shaft size. |
Between 0.4 and 712Nm dependant on
type of insert selected. Shaft sizes range from 3.2mm to 60mm dependant
upon coupling size. |
'KE'
SERIES ELASTOMERIC COUPLINGS: General purpose flexible coupling, excellent
transmission capacities, simple to install with low maintenance
requirements. |
Between 33 and 3300Nm dependant upon
coupling size. Shaft sizes range from 25mm to 130mm again dependant upon coupling
size. |
'GE'
SERIES ELASTOMERIC COUPLINGS: Both vertical and horizontal applications,
excellent at absorbing torsion, vibration and impact loads. |
Between 10 and 975Nm dependant upon
coupling size. Shaft sizes range from 19mm to 90mm again dependant upon
coupling size. |
MORFLEX
COUPLINGS: Excellent where there is considerable misalignment,
cushion shock loads and vibration and very flexible. |
Between 17.5 to 1505Nm dependant upon
coupling size. Shaft sizes range between 15mm to 80mm again dependant upon
coupling size. |
'GF'
TYPE GEAR COUPLINGS: Inexpensive, anti corrosion properties,
maintenance free with a long service life. |
Between 11.0 and 410.0Nm dependant
upon coupling size. Shaft sizes range between 6mm and 65mm again dependant
upon coupling size. |
'GFA
& GFSA' SERIES COUPLINGS: Very heavy duty, torsionally stiff,
can accommodate angular and parallel misalignment. |
Between 600 and 90,000Nm dependant
upon coupling size. Shaft sizes range between 25mm and 175mm dependant
upon coupling size. |
FOR FULL DETAILS ON ANY OF
THE ABOVE, PLEASE CONTACT US AND WE WILL BE ONLY TOO HAPPY TO BE OF
ASSISTANCE |